Saturno 1400 Adhesion Promoter Primer - 5 Liters

Descrição

Adhesion Promoter SPA 1400
Product with high adhesion power, ideal for surfaces that are difficult to stick to when painting or screen printing.

Suitable for:
Polypropylene, Metallized Polyester, Polyethylene Raffia and Recycled Polyethylene with Polypropylene.

Instructions for Use

1. Thoroughly clean the surface to be printed, removing contamination.
2. Shake the product before use.
3. Dampen a flannel or sponge with the Promoter and wipe the area to be printed.
4. Wait 2 to 3 minutes before applying the appropriate paint to the substrate.
   Note: The Promoter maintains its adhesion power for up to 48 hours and should not be applied over painting or printing that has already been done.

Available Packaging

• 900 ml can
• 5 liter can
• 18 liter can

Recommendations
Perform preliminary testing before scale production.

Adhesion Test
Paint adhesion tests should be carried out after 72 hours, and ideally you should wait a week to obtain maximum performance.